Menu
Application story_LKAB

Customer

LKAB mine

Industry

Mining

Pumping 72% rocking solids

Reliability is what we look for in a pump

Flowrox hose pumps were chosen for the LKAB tailings treatment project based on previous experience. “We first learned about Flowrox hose pumps at a Paste Conference in South Africa and were interested in this pumping technology,” says Thord Wennberg, Technical Process Development, LKAB.

“We used a LPP-T hose pump for our first thickener, but it was not in operation for longer than one month before we shelved it. We took the pump out of duty as the slurry was so thin that pump was not needed. With our second thickener we knew that our slurry would be thicker, so we decided to have a go with the hose pump again. We were aware of the benefits of Flowrox pumps compared to centrifugal pumps,” Wennberg continues.

Flowrox Solution: Pumping 72% rocking solids

For the new plant LKAB chose LPP-T100 transfer pumps that are able to pump up to 76% solids. “The fact that the hose pumps are suitable for paste and high-density slurries is important to us.

However, at the moment we are pumping 66 to 70% solids. The
capability of the pumps to effectively pump solids is very crucial for us in the water treatment facilities. The slurry is dense enough to enable us to save water and maintain the flow,” states Åsa Partapuoli, Senior Process Engineer, LKAB.

Reliability is what we look for in a pump

“We have been working with the three pumps in the thickener plant for one year now and they have been operating well. The most important thing for us in terms of pump performance is that they function reliably. All the other benefits come after that. If a pump is not reliable, there is nothing else to benefit from either,” states Ronny Martinson, Maintenance and Operation, LKAB.
“The initial lifetime cost calculation (LCC) for the hose was estimated at three months. After the start up and optimization of the plant we are now on somewhat of a normal duty. If we increase the pressure and the density, then of course also the wear increases, which affects the LCC,” explains Björn Gardelin, Minrox, the Flowrox representative in Sweden. “We have experienced that the Flowrox LPP hose pumps handle solids in the slurry better than other pumps, and that’s very good because we have occasionally to deal with large particles,” Martinson says.
“The Flowrox hose pumps incorporate an advanced rolling design were larger particles can be handled in high pressure with minimal wear. The pumps can run dry and be operated 24/7. The pumps’ rolling design eliminates friction, maximizes hose life and lowers energy consumption. Flowrox pumps are able to handle up to 76% solids,” Gardelin reveals.

“They seem to work quite well, and there’s no need to change the hoses too often. We are now on a 3-month hose change cycle according to the LCC calculation. As I mentioned earlier, reliability is something that we look for in a pump. Now we are looking into expanding the hose lifetime to 6 months. The only challenge has been the hose change due to the large size of the hose and the roll. Luckily, they do not have to be changed more often than four times a year,” Martinson adds.
“We are now looking into training the LKAB maintenance staff to provide techniques and safety for the hose change, which will make the work easier and faster but also safe,” says Gardelin describing the future cooperation with LKAB.

Local relationships enhance operations

“We have enjoyed a good relationship with the customer. We supported LKAB throughout the project and installation. We had frequent visits and telephone conferences to solve issues, maintain contact and provide support,” states Gardelin from Minrox, the Flowrox representative in Sweden.

“We do have a good relationship with quick help for solving problems,” Björn Henriksson, Project Manager LKAB, confirms. “Even though we do speak English and some of us Finnish too, it is important to communicate in Swedish and to have a local contact when dealing with large projects like this one,” Henriksson adds.

LKAB’s ambition is to increase production by 5 percent a year up to 2021.This will entail increasing capacity and efficiency also in the waste and tailings treatment. LKAB has already placed an order for fifth pump for the project.

Map_Mining_LKAB

flowrox_0517_LKAB_location_H1I1075Mikko Nikkinen
Flowrox LPP-T pumps incorporate advanced single roller design, which eliminates friction and lowers energy consumption.

flowrox_0517_LKAB_location_H1I1313Mikko Nikkinen
The LPP-T100 is one of the world’s largest hose pumps, with a maximum continuous flow of 100m3/h.

flowrox_0517_LKAB_location_H1I0936Mikko Nikkinen-2
We work closely with our customers to support them in every step of the project.

Key benefits

Pumping slurries up to 80% solids

Water savings

3-5 times longer hose lifetime

Less maintenance

Less friction

75% less glycerine

Rolling pump design

Save energy up to 40%

Capable of pumping hot mediums 24/7

High continuous flow rate without overheating

Reliability

The Flowrox pumps can be recommended for other paste pumping
applications. - Björn Henriksson, LKAB

  Name File format Size
Flowrox Success Story LKAB_EN PDF file 5.3 MB

Interested in hearing more?

Contact Matti Saloranta, Area Manager of Northern Europe, for more details.

Saloranta, Matti
Tel: +358 40 508 8217
matti.saloranta@flowrox.com

This website stores cookies on your computer. These cookies are used to improve our website and provide more personalised services to you.
Close

Cookies

To make this site work properly, we sometimes place small data files called cookies on your device. Most big websites do this too.

1. What are cookies?

A cookie is a small text file that a website saves on your computer or mobile device when you visit the site. It enables the website to remember your actions and preferences (such as login, language, font size and other display preferences) over a period of time, so you don’t have to keep re-entering them whenever you come back to the site or browse from one page to another.

2. How do we use cookies?

A number of our pages use cookies to remember your actions and preferences (such as login, language, font size and other display preferences.)

Also, some videos embedded in our pages use a cookie to anonymously gather statistics on how you got there and what videos you visited.

Enabling these cookies is not strictly necessary for the website to work but it will provide you with a better browsing experience. You can delete or block these cookies, but if you do that some features of this site may not work as intended.

The cookie-related information is not used to identify you personally and the pattern data is fully under our control. These cookies are not used for any purpose other than those described here.

3. How to control cookies

You can control and/or delete cookies as you wish – for details, see aboutcookies.org. You can delete all cookies that are already on your computer and you can set most browsers to prevent them from being placed. If you do this, however, you may have to manually adjust some preferences every time you visit a site and some services and functionalities may not work.

Close